Varnishing Services Singapore — Doors, Furniture, Staircases & Floors
From a scuffed main door to a full timber staircase or a tired dining table, our varnishing services in Singapore sand, seal and refinish wood so it looks new and stays protected for years.
Our Varnishing Services in Singapore
We varnish almost every wood surface in a home or office — sanding back the old finish and applying fresh coats matched to the sheen and tone you already have.
Door Varnishing
Main doors, office doors, bedroom doors, wardrobe doors and landed-house double-leaf doors.
Furniture Varnishing
Table sets, table tops, coffee tables, office meeting tables and general wood furniture.
Staircase Varnishing
Timber staircase steps and wooden handrails, finished to handle daily foot traffic and grip.
Parquet & Timber Floor Varnishing
Whole-unit floor varnishing as part of sanding and refinishing. See timber floor restoration.
Gap Filling & Colour Matching
Gaps and panel joints filled and stained to blend seamlessly before the final coats.
Panel Replacement
Water- or termite-damaged panels replaced before refinishing — paired with our parquet floor repair service where needed.
Every Surface We Sand & Varnish
A closer look at the specific jobs we're called out for most often.
Doors
- Main door sand & varnish
- Office door sand & varnish
- Bedroom door sand & varnish
- Wardrobe door sand & varnish
- Landed house double-leaf door
- Door patch-up & touch-up varnish
Furniture
- Dining table set sand & varnish
- Table top refinishing
- Coffee table sand & varnish
- Office meeting table sand & varnish
- General wood furniture varnishing
- Cabinetry & wood fitting varnishing
Staircases & Floors
- Timber staircase step sanding & varnish
- Wooden staircase handrail varnish
- Parquet & timber floor varnishing
- Gap filling between wood strips
- Panel replacement for damaged sections
- Colour-matched staining
Oil-Based vs Water-Based Varnish
The right varnish depends on the surface, how it's used, and how quickly you need it back in service. We help you decide during the free assessment.
- Oil-based: warm amber tone, penetrates older or porous wood well — common on doors, staircases and furniture
- Water-based: dries clearer and faster, lower odour — often preferred for floors in occupied homes
- Available in matte, satin or gloss sheen to match existing woodwork
Water-based varnish typically costs a little more than oil-based, but many households prefer it for the shorter downtime and lighter smell.
Our Varnishing Process
Assess & Prep
Inspect the surface, repair any damage, and mask off surrounding areas.
Sand & Clean
Sand back the old varnish and dust down to a smooth, even base.
Stain & Apply Varnish
Colour-match if needed, then apply 2 to 3 coats with drying time between.
Cure & Inspect
Final quality check once cured, ready for normal use.
Varnishing Services Pricing in Singapore
Indicative pricing — actual cost depends on wood condition, surface area, coat count and oil- vs water-based varnish. WhatsApp a few photos for an exact quote.
| Best for | A single door, table or small worn patch |
|---|---|
| What's done | Sand, colour-match, 1–2 coats |
| Price | From SGD 250 |
| 1-bedroom | SGD 350–450 |
|---|---|
| 2-bedroom | SGD 450–550 |
| 3-bedroom | SGD 550–650 |
| Under 500 sq ft | From SGD 800 |
|---|---|
| 501–750 sq ft | From SGD 1,000 |
| 751–1,000 sq ft | From SGD 1,200+ |
| Best for | Custom-sized or partial-floor jobs |
|---|---|
| What's done | Sand, stain, 2–3 coats of varnish |
| Price | SGD 1.40–3.00/sq ft |
Water-based varnish is priced slightly above oil-based across all packages. Doors, furniture and staircases are quoted per piece after a quick photo review — see the free assessment offer below.
Trusted Varnishing Services Across Singapore
- Skilled craftsmen with years of wood finishing experience
- Correct varnish type matched to each surface and setting
- Clean, dust-managed work process for occupied homes
- Free on-site assessment and transparent, upfront pricing
Varnishing Services — Common Questions
What is varnishing and why does wood need it?
Varnishing is the application of a clear or tinted protective coating over wood to seal the surface, resist moisture and stains, and enhance the natural grain. In Singapore's humid climate, worn or missing varnish leaves doors, furniture and floors exposed to swelling, warping and discolouration.
How much do varnishing services cost in Singapore?
Spot touch-ups on doors or furniture start from around SGD 250. Full-unit floor varnishing is typically priced by bedroom count, from about SGD 350 to 450 for a 1-bedroom unit up to SGD 550 to 650 for a 3-bedroom unit, or by area at roughly SGD 1.40 to 3.00 per square foot. Water-based varnish generally costs slightly more than oil-based.
What's the difference between oil-based and water-based varnish?
Oil-based varnish gives a warm amber tone, penetrates porous or older wood well, and is a common choice for doors, staircases and furniture. Water-based varnish dries clearer and faster with less odour, and is often preferred for floors in occupied homes, though it typically costs slightly more.
Do you varnish doors, or only floors?
We varnish main doors, office doors, bedroom doors, wardrobe doors and landed-house double-leaf doors, alongside furniture, staircases and timber or parquet floors. Each surface is sanded and finished to suit how it is used and how much handling it gets.
Can you varnish furniture like tables and cabinets?
Yes. We regularly varnish dining table sets, table tops, coffee tables, office meeting tables and general wood furniture, sanding back the existing finish before applying fresh coats matched to the original tone.
How do you varnish a timber staircase?
Staircase steps and handrails are sanded to remove the worn top layer, cleaned of dust, then coated with 2 to 3 layers of varnish. Handrails often get a slightly different sheen to steps since they are handled constantly rather than walked on.
How often should doors, furniture or floors be re-varnished?
Most homes in Singapore need re-varnishing every 3 to 5 years. High-traffic doors, staircases and floors in direct sunlight or humidity wear faster. Signs it's time include a dull or patchy sheen, visible bare wood, or the surface no longer beading water.
How long does varnishing take and how long before I can use the surface?
A door or piece of furniture is usually touch-dry within 4 to 8 hours and safe for light use after 24 hours, though full curing takes 7 to 14 days. Floors and staircases involving multiple coats over a larger area typically need 1 to 3 days from start to full cure.
Does varnishing fix scratches, water stains or damaged panels?
Light scratches and worn patches are sanded out before varnishing. Deeper gouges, water-damaged sections or broken parquet panels need repair or panel replacement first — see our parquet floor repair service — before a fresh coat of varnish is applied.
Is a quote needed before booking, and is it free?
Yes, most jobs are priced after a quick photo assessment or on-site visit, since condition, wood type and surface area affect cost. Assessments and quotes are free with no obligation to proceed.
Get a Free Varnishing Quote
Door, table, staircase or floor — send a few photos and we'll recommend the right finish and price, no obligation.